==================================================================
SERVER ADMIN COMMANDS
==================================================================
GENERAL COMMANDS:
- Game.listplayers
Every player has an ID number, which is used for kicking/voting
off the player. This command lists those numbers.
- Game.listmaps
Every map on the server has an ID number, which is used for voting
to change maps. This command lists those numbers.
- Game.enablefreecamera *
This enables free look mode on clients who are waiting to spawn.
For *, 1 turns free look on, 0 turns it off. Note that this
command can only be run from the server, or by a user that has
remote server access.
ADMIN COMMANDS:
- Admin.kickplayer *
* is equal to the player id number. Note that this command can
only be run from the server, or by a user that has remote server
access.
- Admin.banplayer *
* is equal to the player id number. Note that this command can
only be run from the server, or by a user that has remote server
access.
- Admin.removeaddressfrombanlist *
* is equal to the IP of a banned player. Note that this command
can only be run from the server, or by a user that has remote
server access.
- Admin.changemap *
* is equal to the map name. Note that this command can only be
run from the server, or by a user that has remote server access.
- Admin.addaddresstobanlist *
* is equal to the IP address to the client that is to be banned.
Note that this command can only be run from the server, or by a
user that has remote server access.
- Admin.clearbanlist
This allows all users that were previously banned to once again
connect to the server. Note that this command can only be run
from the server, or by a user that has remote server access.
- Admin.externalviews *
This command enables/disables external camera views on clients
connected to the server. For *, 1 turns external views on, 0
turns it off. Note that this also disables the nose cam. Also,
note that this command can only be run from the server, or by a
user that has remote server access.
- Admin.listbannedaddresses
Lists the IP addresses that are banned from connecting to the
server. Note that this command can only be run from the server,
or by a user that has remote server access.
- Admin.allownosecam *
This command enables/disables the ability for clients to turn
off the airplane HUD. (Allows easier flying.) For *, 1 turns
nose cam on, 0 turns it off. Also note that if external views
are turned off, nose cam cannot be used. Note that this command
can only be run from the server, or by a user that has remote
server access.
VOTING COMMANDS:
- Game.votemap *
This command will initiate/cast a vote to change maps on the
server. * is equal to the map id number.
- Game.votekickplayer *
This command will initiate/cast a vote to kick a player. Players
on both teams can participate in this vote. * is equal to the
player id number.
- Game.votekickteamplayer *
This command will initiate/cast a vote to kick a player. Voting
is restricted to the team of the player who initiated the vote.
* is equal to the player id number.
- Admin.votingtime *
This command sets the amount of time clients have to cast a vote
after it has been initiated. * is equal to the number of seconds
clients will have to vote. Note that this command can only be run
from the server, or by a user that has remote server access.
REMOTE CONSOLE ACCESS:
- The server needs to have this command executed every map. The
password can include numbers OR letters, but not a combination
of the two. NOTE: DO NOT INCLUDE ANY SPACES IN YOUR PASSWORD.
Admin.enableremoteadmin password
- The client that is to have remote admin access is to execute
this command. The password must be the same as the one set on
the server
Admin.enableremoteadmin password
- To execute a command from a client, one would type the
admin.execremotecommand, followed by the desired admin command
in quotation marks. For example, to kick someone with the player
id of 7 from a client machine, one would type the following
(after going through the first two steps of this section.)
admin.execremotecommand "admin.kickplayer 7"
Or, to change maps, one would use this command:
admin.execremotecommand "admin.changemap tobruk"
OTHER HELPFUL COMMANDS:
- Console.showfps *
This toggles the FPS display on and off. For *, 1 turns FPS on
and 0 turns it off.
- Console.showstats *
This toggles the debug stats display on and off. For *, 1 turns
the debug stats display on and 0 turns it off.
- Game.changeplayername *
This allows a user to quickly change his name. * is equal to the
player name.
==================================================================
MISCELLANEOUS
==================================================================
LANDING CRAFT RAMPS
- When commanding a landing craft (the driver seat) use the arrow
keys up/down to lower and raise the ramp. This helps your team
clear the landing craft quickly.
SINGLE-PLAYER GAME
- Battlefield 1942 will set your default number of bots in
singleplayer for best performance based on your hardware
configuration. If you have a Recommended system (800 Mhz/256MB
RAM/64 MB video card) this should fall around 12-20 depending
on the map. Systems which meet the minimum requirement will
be under that, and systems above the Recommended system
requirements will be above that. You can always adjust that
number if you desire prior to playing a map.
CLEAR KEY-BINDING
- If you have mapped a key to a command in the Options section
you can clear it one of two ways: 1) You can map another key
to that command or 2) You can select that mapped key and press
the ESC to delete all keys bound to that command.
PLAYER LIST
- The in-game player list (TAB) will only show the first 20
players in each team on a map. If your score sets you as the
20+ player, your name will be displayed as the 20th player on
the list.
IWO JIMA/OMAHA BEACH
- These two maps are special CONQUEST ASSAULT maps. For both of
these, once the attacking player takes the beach landing, the
defender CANNOT retake it. It will not appear as a non-
captureable flag. However, as long as the defender holds the
other flags on the land the attacking tickets will slowly
degrade as in other ASSAULT maps.
LANDMINES/DEMOLITION PACKS
- An engineer can disarm these by crouching and using the wrench.
When this is done, they will appear in your inventory up to the
maximum allowed.
SNIPER ZOOM
- To stay zoomed in while sniping, keep the FIRE button depressed
AFTER you shoot. As long as you keep that button pressed you
will remain zoomed and can see the chaos your shot caused. Once
you release the button, you will unzoom and reload.
COMMAND INTERFACE SPAM
- When you use the command interface too many times in a row which
could be considered as spamming, your interface will be disabled
for a short while.
YELLOW ICONS on MINIMAP
- When someone use the command interface their icon will flash in
yellow on the minimap for a brief moment. This is to give you
quicker feedback on their location and thereby the importance of
that message for you.
ALT-TAB
- Battlefield 1942 does not support the ALT-TAB functionality.
WinXP ISSUES
- Fast-User Switching is not supported by Battlefield 1942.
- Limited User accounts are not supported by Battlefield 1942, you
must have administrator access to install or uninstall Battle-
field 1942. If you are playing under a Limited User account, you
must use the Run as Administrator option.
RED SERVER NAMES
- Red server names indicate a password protected server.
dont wory i found this in the good old readme file!
that is located here C:\Program Files\EA GAMES\Battlefield 1942\eReg
SERVER ADMIN COMMANDS
==================================================================
GENERAL COMMANDS:
- Game.listplayers
Every player has an ID number, which is used for kicking/voting
off the player. This command lists those numbers.
- Game.listmaps
Every map on the server has an ID number, which is used for voting
to change maps. This command lists those numbers.
- Game.enablefreecamera *
This enables free look mode on clients who are waiting to spawn.
For *, 1 turns free look on, 0 turns it off. Note that this
command can only be run from the server, or by a user that has
remote server access.
ADMIN COMMANDS:
- Admin.kickplayer *
* is equal to the player id number. Note that this command can
only be run from the server, or by a user that has remote server
access.
- Admin.banplayer *
* is equal to the player id number. Note that this command can
only be run from the server, or by a user that has remote server
access.
- Admin.removeaddressfrombanlist *
* is equal to the IP of a banned player. Note that this command
can only be run from the server, or by a user that has remote
server access.
- Admin.changemap *
* is equal to the map name. Note that this command can only be
run from the server, or by a user that has remote server access.
- Admin.addaddresstobanlist *
* is equal to the IP address to the client that is to be banned.
Note that this command can only be run from the server, or by a
user that has remote server access.
- Admin.clearbanlist
This allows all users that were previously banned to once again
connect to the server. Note that this command can only be run
from the server, or by a user that has remote server access.
- Admin.externalviews *
This command enables/disables external camera views on clients
connected to the server. For *, 1 turns external views on, 0
turns it off. Note that this also disables the nose cam. Also,
note that this command can only be run from the server, or by a
user that has remote server access.
- Admin.listbannedaddresses
Lists the IP addresses that are banned from connecting to the
server. Note that this command can only be run from the server,
or by a user that has remote server access.
- Admin.allownosecam *
This command enables/disables the ability for clients to turn
off the airplane HUD. (Allows easier flying.) For *, 1 turns
nose cam on, 0 turns it off. Also note that if external views
are turned off, nose cam cannot be used. Note that this command
can only be run from the server, or by a user that has remote
server access.
VOTING COMMANDS:
- Game.votemap *
This command will initiate/cast a vote to change maps on the
server. * is equal to the map id number.
- Game.votekickplayer *
This command will initiate/cast a vote to kick a player. Players
on both teams can participate in this vote. * is equal to the
player id number.
- Game.votekickteamplayer *
This command will initiate/cast a vote to kick a player. Voting
is restricted to the team of the player who initiated the vote.
* is equal to the player id number.
- Admin.votingtime *
This command sets the amount of time clients have to cast a vote
after it has been initiated. * is equal to the number of seconds
clients will have to vote. Note that this command can only be run
from the server, or by a user that has remote server access.
REMOTE CONSOLE ACCESS:
- The server needs to have this command executed every map. The
password can include numbers OR letters, but not a combination
of the two. NOTE: DO NOT INCLUDE ANY SPACES IN YOUR PASSWORD.
Admin.enableremoteadmin password
- The client that is to have remote admin access is to execute
this command. The password must be the same as the one set on
the server
Admin.enableremoteadmin password
- To execute a command from a client, one would type the
admin.execremotecommand, followed by the desired admin command
in quotation marks. For example, to kick someone with the player
id of 7 from a client machine, one would type the following
(after going through the first two steps of this section.)
admin.execremotecommand "admin.kickplayer 7"
Or, to change maps, one would use this command:
admin.execremotecommand "admin.changemap tobruk"
OTHER HELPFUL COMMANDS:
- Console.showfps *
This toggles the FPS display on and off. For *, 1 turns FPS on
and 0 turns it off.
- Console.showstats *
This toggles the debug stats display on and off. For *, 1 turns
the debug stats display on and 0 turns it off.
- Game.changeplayername *
This allows a user to quickly change his name. * is equal to the
player name.
==================================================================
MISCELLANEOUS
==================================================================
LANDING CRAFT RAMPS
- When commanding a landing craft (the driver seat) use the arrow
keys up/down to lower and raise the ramp. This helps your team
clear the landing craft quickly.
SINGLE-PLAYER GAME
- Battlefield 1942 will set your default number of bots in
singleplayer for best performance based on your hardware
configuration. If you have a Recommended system (800 Mhz/256MB
RAM/64 MB video card) this should fall around 12-20 depending
on the map. Systems which meet the minimum requirement will
be under that, and systems above the Recommended system
requirements will be above that. You can always adjust that
number if you desire prior to playing a map.
CLEAR KEY-BINDING
- If you have mapped a key to a command in the Options section
you can clear it one of two ways: 1) You can map another key
to that command or 2) You can select that mapped key and press
the ESC to delete all keys bound to that command.
PLAYER LIST
- The in-game player list (TAB) will only show the first 20
players in each team on a map. If your score sets you as the
20+ player, your name will be displayed as the 20th player on
the list.
IWO JIMA/OMAHA BEACH
- These two maps are special CONQUEST ASSAULT maps. For both of
these, once the attacking player takes the beach landing, the
defender CANNOT retake it. It will not appear as a non-
captureable flag. However, as long as the defender holds the
other flags on the land the attacking tickets will slowly
degrade as in other ASSAULT maps.
LANDMINES/DEMOLITION PACKS
- An engineer can disarm these by crouching and using the wrench.
When this is done, they will appear in your inventory up to the
maximum allowed.
SNIPER ZOOM
- To stay zoomed in while sniping, keep the FIRE button depressed
AFTER you shoot. As long as you keep that button pressed you
will remain zoomed and can see the chaos your shot caused. Once
you release the button, you will unzoom and reload.
COMMAND INTERFACE SPAM
- When you use the command interface too many times in a row which
could be considered as spamming, your interface will be disabled
for a short while.
YELLOW ICONS on MINIMAP
- When someone use the command interface their icon will flash in
yellow on the minimap for a brief moment. This is to give you
quicker feedback on their location and thereby the importance of
that message for you.
ALT-TAB
- Battlefield 1942 does not support the ALT-TAB functionality.
WinXP ISSUES
- Fast-User Switching is not supported by Battlefield 1942.
- Limited User accounts are not supported by Battlefield 1942, you
must have administrator access to install or uninstall Battle-
field 1942. If you are playing under a Limited User account, you
must use the Run as Administrator option.
RED SERVER NAMES
- Red server names indicate a password protected server.
dont wory i found this in the good old readme file!
that is located here C:\Program Files\EA GAMES\Battlefield 1942\eReg